Tag: npk blending machine

Organic fertilizer plants now have to meet environmental standards, and dust and noise are prone to complaints. New type organic fertilizer granulators offer more comprehensive dust and noise reduction measures than traditional models, eliminating the need for extensive additional environmental protection equipment.
Let’s first discuss dust reduction. Both the feed and discharge ports feature dust-proof designs. The feed port features a soft dust cover that fits over the conveyor belt outlet, preventing dust from escaping as the material falls. The discharge port incorporates a “deflector + atomizing nozzle” system. As the granules emerge, the deflector guides them in a direction, while the atomizing nozzle sprays a small amount of water (just enough to wet the dust without affecting the particles) to suppress any raised fines. This reduces dust concentration in the workshop by over 60%, eliminating the need for separate, large-scale dust removal equipment.

Next, consider noise reduction. The new type organic fertilizer granulator features a soundproofing pad between the motor and the granulation chamber, resulting in a 10-15 decibel reduction in operating noise compared to traditional machines. For example, while traditional machines typically make a tractor-like sound, the new type organic fertilizer granulator’s operation resembles a washing machine spinning, allowing for normal conversation in the workshop without earplugs. Furthermore, its rollers and ring die work together more smoothly, eliminating the sharp noises caused by friction and preventing disturbance to nearby residents.

Many people use windrow compost turners, thinking that “just turning it is enough.” In reality, they fail to pay attention to details, which can easily lead to spoiled compost (turning it black, smelling, or not fermenting thoroughly).
First, adjust the frequency of turning based on the compost temperature. If the compost temperature is below 45°C, microbial activity is low, so turning it every two days is sufficient. Avoid frequent turning. If the compost temperature exceeds 65°C, turn it once a day. Use a windrow compost turner to move the hot material to the surface to dissipate heat and prevent beneficial bacteria from being killed. This will keep the compost temperature stable at 50-60°C, ensuring optimal fermentation.

Second, check the moisture content of the compost when turning it. If the turned material sticks to the blades and cannot be shaken off, it is too wet. Sprinkle a layer of dry straw on the compost before turning it again. The compost turner will automatically mix it during turning. If the material breaks down and becomes dusty when turned, it is too dry. Spray water on it while turning it, and control the moisture content so that it can be clumped when held in the hand but falls apart when released.
Third, don’t forget to turn the “edge piles.” Many people only turn the large pile in the center, neglecting the smaller piles on the sides, which can cause them to under-ferment. A windrow compost turner can move in a “U-shaped” pattern, turning the center first, then moving around to the edges, bringing the material toward the center, ensuring every pile is turned.

When adding functional ingredients such as slow-release agents, biological agents, and trace elements to BB fertilizer, the BB fertilizer blender requires special adjustments to prevent the additive effects from being lost or unevenly distributed during the blending process.
Biological agents (such as Bacillus subtilis) are sensitive to high temperatures and easily inactivated. Therefore, two key controls must be implemented during blending: first, the blending temperature. By installing a cooling jacket on the BB fertilizer blender barrel, the chamber temperature can be kept below 35°C to prevent frictional heating from the blades, which could reduce the activity of the agent. Second, the mixing order: pre-mix the agent with 10 times the amount of carrier (such as humus powder) to form a “mother powder.” This should then be added after the blender has been running for 5 minutes. This minimizes direct friction between the agent and other ingredients and ensures a viable bacterial count retention rate exceeding 90%.

If adding a slow-release agent, to avoid damaging the coating during mixing, use a “low-shear” impeller (with blunted blade edges), reduce the speed to 15-18 rpm, and control the mixing time to ≤8 minutes. This prevents the slow-release agent particles from excessively colliding and causing the coating to crack, thereby losing its slow-release effect.
For trace elements, they should first be crushed to a size of 100 mesh or larger, pre-diluted with five times the amount of powdered fertilizer (such as monoammonium phosphate powder), and then added to the BB fertilizer blender using a “multi-point feeding” method to ensure even distribution of the trace elements and avoid localized high concentrations that could cause fertilizer damage to the crop.

The granulation performance of a ring die granulator isn’t solely determined by the equipment itself. Linkage optimization with the front-end crushing, mixing, and conditioning processes can significantly improve production efficiency and pellet quality.
During the crushing process, the raw material particle size must be matched to the ring die aperture. For an 8mm ring die aperture, the raw material particle size should be controlled below 2mm, with a particle size deviation of no more than 0.5mm, to prevent large particles from clogging the die aperture. A grading screen can be installed at the pulverizer outlet, with the screen aperture set to 1/4 the ring die aperture, to ensure uniform particle size and reduce the frequency of granulator downtime for cleaning. If the raw material contains a high amount of coarse fiber (such as straw powder), the pulverizer should use a hammer-type mechanism to enhance crushing efficiency.

The mixing process must ensure uniformity among the raw materials, binders, and nutrients. Uneven mixing can result in insufficient nutrients or insufficient strength in some pellets. A typical requirement for uniformity is a coefficient of variation of ≤7%. This can be achieved by adjusting the mixer speed (30-40 rpm) and mixing time (5-8 minutes). Sampling points should be set up at the fertilizer mixer outlet for hourly testing.
During the conditioning process, the steam supply should be adjusted according to the production speed of the ring die granulator. For example, if the pelletizer processes 5 tons of raw materials per hour, the steam supply should be maintained at a stable 0.3-0.4 tons/hour, monitored in real time by a flow meter. If the pelletizer speed is increased to 6 tons/hour, the steam supply should be increased to 0.45-0.5 tons/hour to prevent the raw materials from being too dry or too wet.
By coordinating the speed and flow of the front-end and pelletizer, production efficiency can be increased by 10%-15%, reducing downtime caused by process disconnects.

Fertilizer pellets are prone to clumping during storage and transportation. Through scientific design, coating machines address this issue at its root, focusing on the following key aspects.
First, uniform film coating and protection. The coating machine uses vibrating feeders, combined with guide plates, to evenly distribute pellets. Even pellets of varying sizes are diverted by the guide plates, ensuring that every pellet contacts the film. The symmetrical film guide mechanism wraps the pellets from all sides, creating a complete seal that blocks moisture from reaching the pellets and prevents moisture absorption and clumping. Furthermore, the film tension is precisely controlled, with an error within ±2N. This prevents over-tightening of the pellets, keeping them loose and facilitating even spreading during subsequent fertilization.

Second, precise temperature control is crucial. During the heat-sealing stage, the coating machine uses an intelligent thermostat to maintain a stable temperature of 100-150°C and monitors temperature fluctuations in real time, with fluctuations within ±5°C. This ensures that the film adheres tightly to the pellets, forming a strong protective layer. It also prevents high temperatures from damaging anti-caking components in the fertilizer (such as the coating agents in some slow-release fertilizers), preserving the pellets’ inherent anti-caking properties. The hot air circulation design also ensures a uniform temperature throughout the packaging, preventing uneven shrinkage of the film and damaging the protective layer. Even the slightest movement of the pellets within the package prevents the film from rupturing.